	Sign In Sign-Up

CEP TELEFONLARI GiZLi KODLARI

ÖNEMLİ
Sitedeki hilelerden cep telefonunuza gelebileccek her türlü zarardan uygulayıcı, yani siz sorumlusunuzdur.
Site hiç bir sorumluluk ve teminat veremez, kabul etmeyenler lütfen siteyi terketsinler!

Ericsson codes

Here is how to activate the menu:

<**<
Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

WARNING
Your phone can be locked to a service provider FOREVER by doing this! If
an invalid code is entered all five times, the menu will exit and be deactivated!
Any further attempt to activate the NCK/NSCK lock Menu will result in the
response "Not allowed"!

Tips & Tricks

Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last Dialed calls menu' by
using the 'YES' key you can use the following key stroke instead:
First '0' then '#'.

Battery level indicator when turned OFF...
Press 'NO' key quickly once and then wait for about 2 sec for the battery level
to show up in the display at its normal position.

Full Network Name...
You can see the Full Network Name by doing the following:
Go to the network menu, when the phone displays the networks available
(in 'Select net' and 'Edit list' menu) you can press * and you will see the
full name.

Full Operator List...
You can view the full operator list by doing the following:
Go to the 'Edit list' menu under 'networks'. The phone say 'please wait'
(searching for other networks). When finished, Press the < key once,
then YES twice. Now the phone displays the full list. Browse through
the list with the < > keys.

Call a phone number from SMS message...
You can call within a SMS message if the phone number is written in it.
Example of such a SMS message: Call me at 7654321. Just scroll through
the message until phone number appears on the display, then press 'YES' to
call.

Ericsson 628

To view IMEI number enter * # 0 6 #

To view Software Version enter -> * <- <- * <- *

To read all programmed texts enter -> * <- <- * <- * ->

To view phone network lock status enter < * * < (wait 3 sec)

To fast dial press phone number pos nr and # (Example: 1 5 #)

To fast dial last number press 0 #

To reset main menu language to english enter * # 0 0 0 0 #

To see battery level while phone is turned off quickly press and release on/off(NO button).

To see Extended menus (on older versions) go to MISSED CALLS, empty directory, press and HOLD right arrow button, choose menu type

To see Extended menus (on newer versions) go to READ, empty directory, press and HOLD left arrow button, choose menu type

To edit phone book Turn on extended menus and choose "EditPh.Bk".

Command set

The following commands are recongnized by the phone.Use 9600 baud, 1 stopbit, 8 data bits, no parity.

ATA Pick up phone during ring
AT+GMI Manufacturer identification
AT+GMO Request model Identification
AT+GMR Request revision Identification
AT+GMM
ATDxxx; Dial number xxx
ATH Hangup phone
AT+CFUN=? Define levels of fuctionality in the order of power consumed
AT+CFUN=0 Switches off the phone
AT+CBC Query battery level

Each command has to be followed by a 0x0A, 0x0D sequence, that is carriage return - line feed.

These commands will be ackowledged with an 'OK' prompt. An
incoming call is signalled by the string 'RING' sent by the phone at 9600b in normal mode.

Portable Handsfree Unit

1 Earphone: 16 Ohm
2 Microphone: <- 2 kOhm
5 Connected to 04 (GND)

Pinouts

Left to right, keyboard up
1 	Audio Out
2 	Audio In
3 	Accessory Sense. GND to enable External Mic and Speaker (Analog)
4 	Audio Signal GND.
5 	Portable handsfree In.
6 	Music Mute Out, High when phone is used.
7     In Flash Memory Voltage and Service Voltage, In 0V=normal,+5V=test, +12V=test+flash
8     Logic Out, Status On. Sources over 100mA
9 	Data Out from Mobile Station. Debug messages appear here at 112KBaud when in debug mode. 
10 	Digital Ground and DC return
11 	Data in
12 	DC in for battery charging, DC out for accessory power

Ericsson 688

To view IMEI number *#06#

To view Software Version enter -> * <- <- * <- * CLR

To reset phone language to English *#0000#

>*<<*<*> 1-row text strings. If pressing YES you can check the phones 1-row text programming in currently selected language.

>*<<*<*>> n-row text strings. If pressing YES you can check the phones n-row text programming in currently selected language.

Pinouts

1 = + external power supply. 7.2v @ 600mA.
2 = RS232 input (TTL)
3 = GND (digital)
4 = RS232 output (TTL)
5 = +5V output. Limited.
6 = Test. Switch phone off and provide +5V and switch back on. (set comms at 9600, n,8,1)
7 = Mute (0 - Normal, 1 - In Call)
8 = Internal/external (0 - External Mic/Speak, 1 - Internal Mic/Speak)
9 = GND (analog)
10 = Related to Mic/Speak
11 = BF in
12 = BF out

Ericsson 788

To view IMEI number *#06#

To view Software Version enter * -> * <- <- * <- *

Service Provider Lock is * <- <- * but it is now called the ME lock.

There are two options after selecting yes on another menu. These are lock to Network or lock to NetSubet.

Command set

These commands will be ackowledged with an 'OK' prompt. An
incoming call is signalled by the string 'RING' sent by the phone at 9600b in normal mode.

Portable Handsfree Unit

1 Earphone: 16 Ohm
2 Microphone: <- 2 kOhm
5 Connected to 04 (GND)

Pinouts

Left to right, keyboard up
1 	Audio Out
2 	Audio In
3 	Accessory Sense. GND to enable External Mic and Speaker (Analog)
4 	Audio Signal GND.
5 	Portable handsfree In.
6 	Music Mute Out, High when phone is used.
7     In Flash Memory Voltage and Service Voltage, In 0V=normal,+5V=test, +12V=test+flash
8 	Logic Out, Status On. Sources over 100mA
9 	Data Out from Mobile Station. Debug messages appear here at 112KBaud when in debug mode. 
10 	Digital Ground and DC return
11 	Data in
12 	DC in for battery charging, DC out for accessory power

Ericsson 888

To view IMEI number *#06#

To view Software Version enter * -> * <- <- * <- *
Note: This code also shows version of Infrared driver software and text labels

Pinouts

Alcatel One Touch Easy

Codes :

Press *#06# to view IMEI number

Press *#000000# to enter Service Menu

To view Secret Menu type 000000 then press *

Secret Menu Appears

TRACES - Channel indicator menus
ARRETS - I Dunno
VIDER ARRETS - Press OK and the phone responds: This action is executed!
CTRL CHARGE - It shows the charger voltage and battery voltage.
DAMIER - Display Test

Bosch 738 and Bosch 718, Bosch COM 607 and 908

Codes:

*#06# to display the IMEI
*#0000# to set the language automaticaly (To english)
*#3370# to set the Enhaced Full Rate
#3370# to Reset the phone
*#9000# to enter sim lock code
*#9003# to enter the network code
*#9004# to enter the subset code
*#9100# to remove the sim lock permanently
*#9101# to remove the corporate lock permanently
*#9102# to remove the provider lock permanently
*#9103# to remove the network lock permanently
*#9104# to remove the subset lock permanently

Reveal Engineering Menu

Press *#3262255*8378# (equivalent to *#DANCALL*TEST#) to make secret Engineering menu (Menu 10) appear. Then you will be able to see the following information.

10. Engineering
10.1 MS Info
10.1.1 on
10.1.2 off
10.2 Software details
10.2.1 Software version
10.2.2 EEPROM version
10.2 Test / Production details
10.3.1 Hardware data
10.3.2 Production data
10.3.3 Service data
10.3.4 Mechanical data

MOTOROLA 6200/7500/8200/8400/8700

To activate RBS (Engineering Menus):

[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
(pause means the * key held in until box appears)
You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the < or > keys, and enable it.

To de-activate RBS (Engineering Menus):

[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
(pause means the * key held in until box appears)
Works on 6200's,8200's,1-888's,7500's,8400's and GSM StarTacs with later than version .27 software.

Options under Eng Field Options

Eng Field Options

Active Cell

RxLev -55 Received powerlevel in dBm
NCC 0 National Colour Code, used for identifying channel
BCC 7 Broadcast Colour Code, also for identifying purposes
MSTxPwr 35 Max allowed transmit power 35dBm about 3.2W
C1 003 Is a calculated figure for the quality control signal which is constantly sent out from the RBS quality the signal returning from the phone has. If this value is negative for more than 5 sec then the system will make a cell switch.
Time Adv xxx xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Adjacent Cells

Adj Cell 1
Channel 0033 Channel Number
RxLev -65 Received powerlevel in dBm
BCCH Decode I think it means it is able to decode the channel information contained in the BCCH
RxLevAM -104 Min allowed reception, compare with RxLev -65 and you get the C1 value which is 39 and reported back to base as measure of field strength.
MTxPwr 35 Aain max allowed powerlevel
C1 003 ??
NCC 0 National Colour Code
BCC 6 Broadcast Colour Code

System Parameters

Combined Off ??
AcsClas 0000 Allows different priorities - this network doesn't support it.
MCC 505 Mobile Country Code, 505 for Australia, 240 for Swedes etc
MNC 01 Mobile Network Code, 01 for Mobilenet, 02 for Optus, 03 for Vodafone using MCC 505. MCC+MNC is often called Network Code
LAC 08720 Location Area Code, shows which exchange your're in
CellID 00473 Base Station Identity
T3212 005 Time between periodic network updates (either hours between or time remaing until update, not sure)
BS-PA-MFRM 4 ??
XZQTY 14.3 ??

Motorola Flip Pinout:

ANT- (O) | | | | | | | | | |
        10 9 8 7 6 5 4 3 2 1
        Top of phone (screen)

1) Audio Ground
2) Ext b+
3) T Data
4) C Data
5) R Data
6) Logic Ground
7) Audio Out - on/off
8) Audio In
9) Manual Test
10) Battery Feedback

PHILIPS

Philips DIGA phones:

Blocking list *#3333*#
Time connected *#2558*#
Flags,something *#3377*#
Security code *#7489*#

Philips FIZZ phones:

IMEI code *#06#
SW info *#8377*#
Security code *#1234*#

Philips SPARK phones:

IMEI: *#06#

Philips GENIE phones:

*#06# IMEI number
*#2254*# Status register: C, BS, RR, MMI, CREAT.
*#2255*# activate and deactivate the "DEBUG CALL"-Mode; when activated, make a call to a busy line an the phone will display some hex-codes on the display
*#2558*# the time in days,hours and minutes you are connected to the net
*#2562*# not clear; the phone reconnects to the net
*#2565*# not clear; warmstart
*#3333*# (NO) BLOCKING - list (15 items)
*#2377*# "BEER": not clear, the phone waits a random time and reconnects to the net
*#3377*# Init, Flags, SIM LCK
*#3353*# resets the (NO) BLOCKING - list
*#7378*# Name, Length, SIM phase
*#7489*# SECURITY CODE
*#7693*# activate and deactivate the SLEEP MODE (when deactivated the battery will go down!)
*#7787*# SPURIOUS INTERRUPT
*#7948*# SWITCH OFF
*#8463*# Some information about the SLEEP MODE: Wake, Sleep Req., Sleep

Pinouts for Philips Fizz and Spark

1 GROUND
2 GROUND
3 HANDS FREE ON/OFF
4 MUTE
5 TX
6 RX
7 RTS
8 REPROGRAMMING
9 ON HOOK CHARGER
10 AUX MIC
11 AUX SPEAKER
12 GROUND

SONY Mobile Phones

Sony CMD-Z 1

Press *#06# to view IMEI

Show Software version and manufacturing date : Press # 8377466 # (#version#)

Sony CMDX 1000

Show Software date : Remove your SIM Card, then press : * # 06 #
and finally press:
[left softkey]
To enter Monitor Mode on Network Option menu:
Menu
9 (Phone Options)
7 (Phone Status)
[Left Display Button] (left MENU key) 7684666 [HangUp Button] (Red HandSet key)

Some characters explained

*	activate
**	register and activate
*#	check status
#	unregister
##	unregister and deactivate

Call barring
*33code#	Activate barr all outgoing calls (for code see "Safety" above)
#33*code#	Deactivate barr all outgoing calls
*#33#	Check status of barr all outgoing calls
*330code#	Activate barr all calls
#330*code#	Deactivate barr all calls
#330code#	Check status of barr all calls
*331code#	Activate barr all outgoing international calls
#331*code#	Deactivate barr all outgoing international calls
#331code#	Check status of barr all outgoing international calls
*332code#	Activate barr all outgoing international calls except home country
#332*code#	Deactivate barr all outgoing international calls except home country
#332code#	Check status of barr all outgoing international calls except home country
*333code#	Activate barr all outgoing calls
#333*code# </

Nokia

I dont take any responsibility if something happends with your phone.
You test the codes on your own risk

Latest known Software:
Nokia 1610: V4.19
Nokia 1611: V4.03
Nokia 2110: V5.31
Nokia 3110: V7.32
Nokia 5110: V5.11 (18/02/99)
Nokia 6080: V4.80
Nokia 6081: V5.14
Nokia 6110: V5.31 (18/02/99)
Nokia 6150: V5.02 (02/02/99)
Nokia 8810: V4.05 (26/11/98)

Network Monitor (61xx)
This is a hidden menu in your Nokia Phone. If you want to active it you'll have to reprogram
some chips inside of your phone. For example the Nokia 6110 Network Monitor:
1. Check your Software version. You can continue ONLY if you have 4.33, 4.73 or 5.24!
2. Take apart the phone.
3. Desolder the EEProm (ATMEL AT 24C64).
4. Read out the data with an EEProm progammer and save it to a file (backup).
5. If you have v4.33 or 4.73 then change adress 03B8 from 00 to FF.
6. If you have v5-24 then change 0378 from 00 to FF.
7. Write the new data to the EEProm and solder it back into the mobile phone.
8. Power on your phone and you should have menu number 10.

The Network Monitor gives you the following informations:
Carrier number
MS RX level in dBM
Received signal quality
MS TX power level
C1 (path loss criterion, used for cell selection and reselection). The range is -99 to 99
RLT (Radio Link timeout)
Timeslot
Indication of the transmitter status
Information on the network parameters
TMSI (temporary Mobile Subscriber Identity)
Cell Identification (CELL ID, number of the cell being used)
MCC (Mobile Country Code)
MNC (Mobile Network Code)
LAC (location Area Code)
Ciphering (on/off)
Hopping (on/off)
DTX (on/off)
Discarding cell barred information

What is WinTESLA?
Nokia TEst ans Service Locals Application.

Call Quality

*3370# Activate EFR
#3370# Deactivate EFR

NOKIA 6110

To view IMEI number enter * # 0 6 #
To view Software Version enter * # 0 0 0 0 #
Then you will see: (Software Version, Date of Software release, Phone Type)
To see more info about phone enter * # 9 2 7 0 2 6 8 9 #
Then you will see: (Date of phone manufacture, Serial and IMEI numbers, Purchasing date, Last Repair Date)
To increase call quality and decrease battery life enter * 3 3 7 0 # (to turn back enter enter # 3 3 7 0 # )
To decrease call quality and increase battery life enter * 4 7 2 0 # (to turn back enter enter # 4 7 2 0 # )

Your business card on the display:
- Change your currency (Menu 2-7-2-1) to your provider-symbol or anything you want (3 letters max.)
- Set the phone-cost unit (Menu 2-7-2-1) to 1
- Enter the cost-limit (Menu 2-7-1-1) like your phone-number
- Change one profile (Menu 3-...-3) to your name

Add new tones

How to get new ringing tones :
Set SMSC (message central) to +358405202999
send an SMS with the word
TONES
Send it to 99999
When you get the reply (this will be in a markup language)
go to edit the message so the tone you want is the only without an
asterix (*) in front of it. Then send this message to 99999 again.
This will then send a ringtone to you.
If it works, it should says: NEW RINGTONE RECEIVED.
Then you can play it, discard it or accept it as tone no.36

*#sim0clock#

(*#746025625#)

Shows whether or not your sim card supports clock stopping. Not all versions of the software will report this.

NOKIA 5110
To view IMEI number enter * # 0 6 #
To view Software Version enter * # 0 0 0 0 #
Then you will see: (Software Version, Date of Software release, Phone Type)
To see more info about phone enter * # 9 2 7 0 2 6 8 9 #
Then you will see: (Date of phone manufacture, Serial and IMEI numbers, Purchasing date, Last Repair Date)
To increase call quality and decrease battery life enter * 3 3 7 0 # (to turn back enter enter # 3 3 7 0 # )
To decrease call quality and increase battery life enter * 4 7 2 0 # (to turn back enter enter # 4 7 2 0 # )
To fast find and dial phone number press <arrow down> and then press 1st letter of name (For John - press 5)
To quickly change phone profile press <on/off> then again click <on/off> till choose needed profile and then hold <on/off>
To get + p w while display is in digit mode press many times * till needed letter apears on display
To Check, activate or remove card restrictions
press #pw+1234567890+1 - Provider-Lock status
press #pw+1234567890+2 - Network-Lock status
press #pw+1234567890+3 - Provider(???)-Lock status
press #pw+1234567890+4 - SimCard-Lock status
1234567890(master code) is a 10 digit code, based on the phones IMEI number

Revealing Hidden Menus of Nokia 6110

There are two menus on the Nokia 6100 series which are not enabled by defualt, and only appear when some optional accessories are fitted, namely the hands free kit or the car kit.

Note: The following instructions require you to short out certain contacts on your phone. Again, I will not hold responsible for any damages that may happen.

As you look at the bottom of the Nokia 6100 series, on the right, you should see 7 gold connectors in a row. For the following instructions I am going to refer to these as pins 1 to 7 with pin 1 the leftmost pin of the seven and pin 7 the rightmost pin.

Enabling The Hands Free/Headset Menu

Short out pins 1 and 2. After a few seconds, the word 'Headset' should appear on the display. You should now find that you have menu 3-6 enabled.

Enabling The Car Kit Menu

Short out pins 2 and 3. After a few seconds, the word 'Car' should appear on the display. You should now find that you have menu 3-7 enabled.

Removing The Menus

The only way to remove the menus is to select the 'Restore Factory Settings' option from the settings menu of your phone. When asked, enter your security code (by default it is 12345). Doing this will get rid of the menus, but will also set your ringtone back to it's default value and remove the uploaded ringtone if you had one in memory. It doesn't affect the game high scores, phone numbers etc.

Revealing Hidden Menus of Nokia 6150

There are two menus on the Nokia 6100 series which are not enabled by defualt, and only appear when some optional accessories are fitted, namely the hands free kit or the car kit.

Note: The following instructions require you to short out certain contacts on your phone. Again, I will not hold responsible for any damages that may happen.

Enabling The Network Monitor for Nokia 6110

The following instructions will enable the network monitor feature appear on your Nokia 6110.

After you have done the following procedure, you should have a menu 10 on your phone which will allow you to check almost anything about the network you're phone is connected to.

The following instructions are very technical and should only be undertaken by those people who have an electronics background. I will not hold responsible for any damages that may happen to your mobile phones if these procedures were followed.